Fuel System: Turbocharger: Disassembly
- Remove exhaust pipe joint. See Figure
. Remove coolant pipe (inboard), inlet oil pipe and coolant pipe (outboard). Remove outlet oil pipe. Remove exhaust manifold. For reassembly reference, place turbocharger on a surface plate. See Fig 1
. Mark turbine plate and turbine housing in line with outlet oil pipe.
- Using ruler, mark wastegate actuator. See Fig 1
. Measure and record distance from surface plate to mark on actuator. Remove wastegate actuator, compressor plate and compressor housing. Remove turbine plates and bearing assembly.
Courtesy of MAZDA MOTORS CORP.