Test D: Main Switch Operates, But Sub-Switch Does Not Operate Power Window
- Turn ignition on. Turn power-cut switch on main switch to ON position. Check voltage at Black/Blue wire terminal of main switch connector. If battery voltage is present, go to next step. If battery voltage is not present, check power-cut switch portion of main switch. See MAIN SWITCH under COMPONENT TESTS.
- Check voltage at Black/Blue wire terminal of sub-switch connector. If battery voltage is present, check sub-switch. See SUB-SWITCH under COMPONENT TESTS. If battery voltage is not present, repair wiring harness between main switch and sub-switch. See WIRING DIAGRAMS .