Engine Controls - Remove/Install/Overhaul
- Introduction
- Ignition System
- Fuel System
- Notes
- Fuel System Pressure Release
- Fuel Line Connectors (NAVAJO)
- Fuel System Priming
- Carburetor (B2200)
- Removal & Installation
- Disassembly (Air Horn & Choke Assembly)
- Disassembly (Needle Valve & Float)
- Disassembly (Air Bleeds & Jets)
- Disassembly (Main Body)
- Disassembly (Throttle Body)
- Cleaning & Inspection
- Reassembly (All Parts)
- Adjusting Float Level
- Adjusting Float Drop
- Adjusting Choke Pull-Off Diaphragm
- Adjusting Fast Idle Cam (Throttle Opening Angle)
- Adjusting Fast Idle Cam (Choke Valve Angle)
- Adjusting Choke Unloader
- Adjusting Secondary Throttle Valve
- Adjusting Accelerator Cable
- Fuel Pump
- Notes
- Removal (B2200 Carbureted With Electric Pump, B2200 PFI & B2600i)
- Installation (B2200 Carbureted With Electric Pump, B2200 PFI & B2600i)
- Removal (Miata, Protege, RX7 & 323)
- Installation (Miata, Protege, RX7 & 323)
- Removal (MPV & MX-3)
- Installation (MPV & MX-3)
- Removal (MX-6 & 626)
- Installation (MX-6 & 626)
- Removal & Installation (929)
- Removal (Navajo)
- Installation (Navajo)
- Fuel Pressure Regulator
- Fuel Rails & Injectors
- Notes
- Removal & Installation (B2200 PFI, B2600i & MPV 2.6L)
- Removal & Installation (Miata)
- Removal & Installation (MPV 3.0L)
- Removal & Installation (MX-3 1.6L, MX-6 & 626 2.0L, Protege & 323)
- Removal & Installation (MX-3 1.8L, MX-6 & 626 2.5L)
- Removal (Navajo)
- Installation (Navajo)
- Removal & Installation (RX7)
- Removal & Installation (929)
- Oxygen Sensor
- Throttle Body
- Turbocharger
- Torque Specifications