Combination Switch: Installation
- Install combination switch and clockspring assembly. Before installing steering wheel, center clockspring. To center clockspring, set front wheels straight ahead. Turn clockspring connector clockwise until it stops. DO NOT force clockspring.
- Rotate connector 2 3/4 turns (counterclockwise). Rotate clockspring connector further (as necessary) to align marks on connector and outer housing. See Fig 1
.
- Install steering wheel. Tighten steering wheel lock nut to specification. See TORQUE SPECIFICATIONS
table at the end of this article. Install air bag module. See AIR BAG RESTRAINT SYSTEM
article in the ACCESSORIES/SAFETY EQUIPMENT section.
Courtesy of MAZDA MOTORS CORP.