Throttle Position (TP) Sensor

NOTE: Throttle position sensor on MX-6 2.0L and 626 2.0L is not adjustable.

NOTE: For information on connector terminal identification and test conditions specified in the following tables, see ADJUSTMENTS article in the ENGINE PERFORMANCE section.

TP SENSOR CONTINUITY

Test Condition ⁽¹⁾

⁽²⁾ Continuity

.006" (.15 mm)

Yes

.020" (.5 mm)

⁽¹⁾	Insert feeler gauge of specified thickness between throttle lever and throttle stop screw.

⁽²⁾	Check continuity with ohmmeter connected between TP sensor terminals "E" and IDL.