Crank Angle Sensor Resistance
- Disconnect crank angle sensor connector. Crank angle sensor is a separate unit located at front of crankshaft. Measure resistance between terminals. See Fig 1 . If resistance is not as indicated, replace crank angle sensor.
- If ignition coil resistance and crank angle sensor test okay, check for spark. If spark is still not present, go to HALL-EFFECT SENSORS test procedure.
CRANK ANGLE SENSOR RESISTANCE
| Application | Ohms |
|---|---|
| MX-6 & 626 2.5L (At Crankshaft Pulley) | 520-580 |