Circuit Opening Relay
- With relay connected, ensure battery voltage is present at relay terminal Black/White wire. For locations of circuit opening relay, see CIRCUIT OPENING RELAY LOCATION table.
- If voltages are okay, remove relay from vehicle. Using a 12-volt battery source, connect 12 volts to relay terminals "A" and "B". Ensure continuity is present across terminals "C" and "D". If continuity is not as specified, replace circuit opening relay.
CIRCUIT OPENING RELAY LOCATION
| Application | Location |
|---|---|
| 929 | In Engine Compartment Relay Box, Near Battery |
CIRCUIT OPENING RELAY CIRCUIT VOLTAGE
| Terminal | Ignition ON: Volts | Ignition START: Volts | Idle Volts |
|---|---|---|---|
| Fp | 0 | 12 | 12 |
| Fc | 12 | 0 | 0 |
| B | 12 | 12 | 12 |
| STA | 0 | 12 | 0 |
| E1 | 0 | 0 | 0 |