Circuit Opening Relay
- With relay connected, ensure specified voltage is present at relay terminals. See CIRCUIT OPENING RELAY CIRCUIT VOLTAGE table. For location of circuit opening relays, see CIRCUIT OPENING RELAY LOCATION table.
- If voltages are okay, remove relay from vehicle. Check relay operation using a 12-volt battery source and perform resistance tests. See Fig 1 .
CIRCUIT OPENING RELAY LOCATION
| Application | Location |
|---|---|
| MPV | Mounted On PCM, Under Protective Cover On Passenger Side Floor |
CIRCUIT OPENING RELAY CIRCUIT VOLTAGE
| Terminal | Ignition ON: Volts | Ignition START: Volts | Idle Volts |
|---|---|---|---|
| Fp | 0 | 12 | 12 |
| Fc | 12 | 0 | 0 |
| B | 12 | 12 | 12 |
| STA | 0 | 12 | 0 |
| E1 | 0 | 0 | 0 |