Idle Speed & Ignition Timing

Ensure idle speed and base ignition timing are set to specification. If necessary, see ADJUSTMENTS article in the ENGINE PERFORMANCE section.

IGNITION TIMING SPECIFICATIONS

Application

Man. Trans.

⁽¹⁾ Auto. Trans.

2.6L ⁽²⁾

N/A

5 @ 770

3.0L ⁽³⁾

N/A

11 @ 800

⁽¹⁾	Place automatic transmission in Park.

⁽²⁾	Connect jumper wire between terminals TEN and GRN of diagnostic connector.

⁽³⁾	Connect jumper wire between Green test connector and ground.