Distributor Pick-Up Coil Resistance (3.0L)
- Disconnect pick-up coil from distributor. Using an ohmmeter, measure resistance between terminals on pick-up coil. See Fig 1 . Replace pick-up coil if resistance is not as specified in DISTRIBUTOR PICK-UP COIL RESISTANCE table.
- Ensure ignition coil has battery voltage. If ignition coil resistance and pick-up coil test okay, check for spark. If spark is still not present, go to appropriate IGNITOR test procedure. If spark is still not present and ignitor is okay, see appropriate G - TESTS W/ CODES article in the ENGINE PERFORMANCE section below.
DISTRIBUTOR PICK-UP COIL RESISTANCE
| Ignitor Terminals | Ohms |
|---|---|
| COM & Ne+ | 205-255 |
| COM & G1+ | 205-255 |
| COM & G2+ | 205-255 |