Mechanical Inspection: Compression
WARNING: This page is about a different car, the 1994 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
Check engine mechanical condition with a compression gauge, vacuum gauge, or an engine analyzer. See engine analyzer manual for specific instructions.
WARNING:
DO NOT use ignition switch during compression tests on fuel injected vehicles. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard or contaminate the engine's oiling system.
COMPRESSION SPECIFICATIONS
| Application | Minimum psi (kg/cm2 ) @ RPM | Standard psi (kg/cm2 ) @ RPM |
|---|---|---|
| 2.6L | 142 (10.0) @ 280 | 185 (13.0) @ 280 |
| 3.0L | 121 (8.5) @ 300 | 164 (11.5) @ 300 |