Manifold Absolute Pressure (Map) Sensor
- Warm engine to operating temperature. Turn all accessories off. Connect positive lead of voltmeter to MAP sensor terminal "A" and negative lead to terminal "B".
- With engine at idle, voltmeter should read 1.3-1.6 volts. Disconnect hose from MAP sensor and plug. See Fig 1
. Voltmeter should read 2.38-2.78 volts.
- Connect a vacuum pump to MAP sensor, and apply 29 in. Hg. Voltmeter should read 4.35-4.65 volts. If voltmeter readings do not test as described, replace MAP sensor.
Courtesy of MAZDA MOTORS CORP.