Crankshaft Position Sensor Resistance
- Disconnect crankshaft position sensor connector. Crankshaft position sensor is a separate unit located at front of crankshaft. Measure resistance between terminals. See CRANKSHAFT POSITION SENSOR RESISTANCE table. See Fig 1 . If resistance is not as indicated, replace crankshaft position sensor.
- If ignition coil resistance and crankshaft position sensor test okay, check for spark. If spark is still not present, go to appropriate HALL EFFECT SENSOR procedure below.
CRANKSHAFT POSITION SENSOR RESISTANCE
| Application | Ohms | Air Gap In. (mm) |
|---|---|---|
| 929 | 950-1250 | .20-.59 (0.5-1.5) |