LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> B3000 Base, Standard >> Repair and Diagnosis >> Engine Performance >> Sensor Range Charts >> Engine Controls - Sensor Operating Range Charts >> Introduction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Controls - Sensor Operating Range Charts: Introduction

Sensor operating range information can help determine if a sensor is out of calibration. An out-of-calibration sensor may not set a trouble code, but it may cause driveability problems.

NOTE: Unless stated otherwise in test procedure, perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance.
AIRFLOW SENSOR VOLTAGES

Terminal (1) Ignition On Volts Engine Running Volts
"A" (Power Supply) 12.0 12.0
"B" (Airflow Signal 0.5-1.0 1.0-2.0
"D" (Ground) 0 0
"E" (Ground) 0 0
(1) See appropriate SYSTEM/COMPONENT TESTS article for terminal identification.
ENGINE COOLANT TEMPERATURE (ECT) SENSOR RESISTANCE

Temperature Ohms
50°F (10°C) 58,750
68°F (20°C) 37,300
176°F (80°C) 384
194°F (90°C) 280
EGR POSITION SENSOR RESISTANCE

Terminals (1) Ohms With No Vacuum Applied Ohms @ 5.9 in. Hg
"A" & "B" 2700 2700
"A" & "C" 500 2700
"B" & "C" 2400 100
(1) See appropriate SYSTEM/COMPONENT TESTS article for terminal identification.
INTAKE AIR TEMPERATURE (IAT) SENSOR RESISTANCE

Temperature Ohms
50°F (10°C) 58,750
68°F (20°C) 37,300
176°F (80°C) 384
194°F (90°C) 280
OXYGEN SENSOR

Operating Condition Volts
Rapidly Accelerating 0.5-1.0
Deceleration 0.0-0.4
THROTTLE POSITION SENSOR VOLTAGE

Application (1) Volts
Closed Throttle .60
Wide Open Throttle 4.50
(1) Check voltage with voltmeter connected between breakout box pins No. 46 and 47.