Throttle Position (TP) Sensor

NOTE: For information on connector terminal identification and test conditions specified in the following tables, see ADJUSTMENTS article.

TP SENSOR CONTINUITY

Condition ⁽¹⁾

Continuity Between Terminals "A" & "B"

.012" (.30 mm)

Yes

.016" (.40 mm)

⁽¹⁾	Insert feeler gauge of specified thickness between throttle lever and throttle stop screw.

TP SENSOR VOLTAGE

Wire Color To ground

Closed Throttle Volts

WOT Volts

Blue/White (2M) ⁽¹⁾

0.1-1.0

2.8-4.5

⁽¹⁾	ECM/PCM terminal pin No. in parentheses.