Mechanical Inspection: Compression

Check engine mechanical condition with a compression gauge, vacuum gauge, or an engine analyzer. See engine analyzer manual for specific instructions.

WARNING: DO NOT use ignition switch during compression tests on fuel injected vehicles. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard or contaminate the engine's oiling system.

COMPRESSION SPECIFICATIONS

Application

Minimum psi (kg/cm² ) @ RPM

Standard psi (kg/cm² ) @ RPM

Millenia 2.5L ⁽¹⁾

142 (10.0) @ 250

203 (14.3) @ 250

⁽¹⁾	Maximum difference between cylinders is 28 psi (2.0 kg/cm² ).