LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1995 >> RX-7 Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System/Component Tests >> Computerized Engine Controls >> Fuel Temperature Sensor
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Temperature Sensor

  1. Remove circuit opening relay. Start engine and allow system to fuel pressure to bleed down. Install circuit opening relay. Remove upper intake manifold. Remove fuel temperature sensor from fuel rail.
  2. Place sensor and thermometer in container of water. Connect ohmmeter to sensor terminals. Heat water. Note resistance at specified temperatures. See FUEL TEMPERATURE SENSOR RESISTANCE  table. Replace sensor as necessary.
FUEL TEMPERATURE SENSOR RESISTANCE

Temperature Ohms
68°F (20°C) 2200-2700
176°F (80°C) 290-350
scientia non olet · About LEMON Manuals