Mechanical Inspection: Compression

Check engine mechanical condition with a compression gauge, vacuum gauge, or an engine analyzer. See engine analyzer manual for specific instructions.

WARNING: DO NOT use ignition switch during compression tests on fuel injected vehicles. Use a remote starter to crank engine. Fuel injectors on many models are triggered by ignition switch during cranking mode, which can create a fire hazard or contaminate the engine's oiling system.

COMPRESSION SPECIFICATIONS

Application

Minimum psi (kg/cm² ) @ RPM

Standard psi (kg/cm² ) @ RPM

MPV ⁽¹⁾

121 (8.5) @ 300

164 (11.5) @ 300

⁽¹⁾	Maximum difference between cylinders is 28 psi (2.0 kg/cm² ).