Throttle Position (TP) Sensor

NOTE: For information on connector terminal identification and test conditions specified in the following tables, see ADJUSTMENTS - 2.5L article.

TP SENSOR CONTINUITY

Condition ⁽¹⁾

Continuity Between Terminals "C" & "D"

.006" (.15 mm)

Yes

.020" (.50 mm)

⁽¹⁾	Insert feeler gauge of specified thickness between throttle lever and throttle stop screw.

TP SENSOR VOLTAGE

Wire Color To Ground

Closed Throttle Volts

WOT Volts

Yellow/Red (3B) ⁽¹⁾

0.1-1.0

2.8-4.5

⁽¹⁾	ECM/PCM terminal pin No. in parentheses.