Crankshaft Position Sensor Resistance
- Disconnect crankshaft position sensor connector. Crankshaft position sensor is a separate unit located at front of crankshaft. Measure resistance between terminals. See CRANKSHAFT POSITION SENSOR RESISTANCE table. See Fig 1 . If resistance is not as indicated, replace crankshaft position sensor.
- If ignition coil resistance and crankshaft position sensor test okay, check for spark. If spark is still not present, on RX7, go to IGNITION CONTROL MODULE. Go to appropriate HALL EFFECT SENSOR procedure below.
CRANKSHAFT POSITION SENSOR RESISTANCE
| Application | Ohms | Air Gap In. (mm) |
|---|---|---|
| Millenia 2.5L | 520-580 | .040-.078 (1-2) |