Ignition Control Module
Check ignition coil, ECM/PCM and high-tension lead connections. Check secondary coil winding and high-tension lead resistance. Measure voltage between ground and appropriate ECM/PCM terminals. See ECM/PCM TERMINAL IDENTIFICATION table. If all measurements are within specification, and misfire still occurs, replace distributor or ignition coil.
ECM/PCM TERMINAL IDENTIFICATION
| Wire Color to Ground (1) | KOEO Volts | KOER (Idle) Volts | |||
|---|---|---|---|---|---|
| 626 2.5L | |||||
| Blue/Orange (4F) | 0 Or 5 | 2.5 | |||
| Yellow/Black (4S) | 0 | .6 | |||
|
|||||