LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> B2300 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Additional System Functions >> Drive Cycle Procedure >> Comprehensive Component Monitor Repair Verification Drive Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Comprehensive Component Monitor Repair Verification Drive Mode

  1. Refer to and complete the Preparation before initiating the following repair verification steps.
  2. Start the engine and go through the entire OBD-II Drive Cycle until the Comprehensive Component Monitor shows the completion status by clearing the code P1000 on the scan tool.
  3. With the ignition key ON (vehicle at idle or engine off), check for Retrieve/Clear Continuous DTCs.
scientia non olet · About LEMON Manuals