LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 1997 >> B2300 Base, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes >> Additional System Functions >> Drive Cycle Procedure >> Misfire Monitor Repair Verification Drive Mode
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Misfire Monitor Repair Verification Drive Mode

  1. Start the engine and drive the vehicle to a location where speeds can reach 88-105 km/h (55-65 mph) and coast down to 56 km/h (35 mph) without traffic interference.
  2. Perform following drive procedure three consecutive times.
    1. Accelerate on highway to 97 km/h (60 mph). Maintain speed for 30 seconds.
    2. Coast down with foot off the accelerator pedal from 97 km/h (60 mph)
  3. With the ignition key ON (vehicle at idle or engine off), check for Retrieve/Clear Continuous DTCs.
scientia non olet · About LEMON Manuals