Idle Speed & Ignition Timing

WARNING: This page is about a different car, the 1997 Mazda B4000. However, it is still accessible from the selected car via links, so may be relevant.

Ensure idle speed and base ignition timing are set to specification. See the appropriate IDLE SPEED SPECIFICATIONS and IGNITION TIMING SPECIFICATIONS tables. If adjustment is necessary, see ADJUSTMENTS article.

IDLE SPEED SPECIFICATIONS

Application ⁽¹⁾

M/T RPM

⁽²⁾ A/T RPM

B4000

⁽³⁾

⁽¹⁾	Connect a jumper wire between terminals TEN and GND at data link connector. See Figure .

⁽²⁾	Place automatic transmission in Park.

⁽³⁾	Information is not available from manufacturer.

IGNITION TIMING SPECIFICATIONS (Degrees BTDC @ RPM)

Application

M/T

⁽¹⁾ A/T

B4000

8-12 @ Idle

⁽¹⁾	Place automatic transmission in Park.