Fuel Pump Relay
Remove fuel pump relay. See FUEL PUMP RELAY LOCATIONS table below. Using ohmmeter, check for continuity between relay terminals "C" and "D". See Fig 1 . Continuity should not exist. Apply battery voltage to terminal "A" and ground terminal "B". Again, check for continuity between relay terminals "C" and "D". Continuity should exist with battery voltage applied. If continuity is not as specified, replace fuel pump relay.
FUEL PUMP RELAY LOCATIONS
| Application | Location |
|---|---|
| MPV | Mounted On ECM, Under Protective Cover On Passenger Side Floor |