Fuel Pump Relay

Remove fuel pump relay. See FUEL PUMP RELAY LOCATIONS table below. Check for continuity between relay terminals "A" and "B" See Fig 1 . Continuity should exist. Using jumper wires, apply battery voltage to relay terminal "A" and ground terminal "B". Check for continuity between relay terminals "C" and "E". Continuity should exist. If continuity is not as specified, replace fuel pump relay.

Fig 1: Identifying Fuel Pump Relay Terminals

Courtesy of MAZDA MOTORS CORP.

Fig 2: Testing Main & Fuel Pump Relays

Courtesy of MAZDA MOTORS CORP.