Engine Controls - Sensor Operating Range Charts - 2.5L: Introduction: Notes

Sensor operating range information can help determine if a sensor is out of calibration. An out-of-calibration sensor may not set a diagnostic trouble code, but it may cause driveability problems.

NOTE: Unless stated otherwise in test procedure, perform all voltage tests using a Digital Volt-Ohmmeter (DVOM) with a minimum 10-megohm input impedance.

CRANKSHAFT POSITION SENSOR RESISTANCE

Application

⁽¹⁾ Ohms

Millenia 2.5L

520-580

⁽¹⁾	Measure resistance between sensor terminals "A" and "B". See Fig 1 . Specification is with sensor temperature at 68°F (20°C).

Fig 1: Checking Crankshaft Position Sensor Resistance

Courtesy of MAZDA MOTORS CORP.