Electronic Ignition System
- All models use a distributorless high data rate electronic ignition system. Diagnosis of this ignition system requires some or all of the following equipment:
- High impedance DVOM.
- EI Diagnostic Harness (49 UN01 057).
- 60-pin breakout box (49 UN01 058).
- 104-pin breakout box (49 UN01 130).
- New Generation Star (NGS) Scan Tool (49 T088 0A0) or OBD-II equivalent scan tool.
- Check for any stored Diagnostic Trouble Codes (DTCs) and repair as necessary. See TESTS W/CODES
article. If no DTCs are present, go to NO START (NO SPARK).