Drive Cycle-Mode 4

Ensure following conditions are met:

• Engine coolant temperature is 32-95° F (0-35° C).
• Intake air temperature is 50-140° F (10-60° C).
• Barometric pressure is 72 kPa.
• Fuel gauge needle points within 15-85 percent.

Start and operate engine at 3500 RPM for 200 seconds. Within next 40 seconds, accelerate vehicle to 40-60 MPH (65-96 km/H). Maintain vehicle speed for 6 minutes. See Fig 1 .

Fig 1: Drive Cycle-Mode 4 Vehicle Speed Table

Courtesy of MAZDA MOTORS CORP.