Crankshaft Position Sensor Resistance
Disconnect crankshaft position sensor connector. Using ohmmeter, measure resistance between terminals "A" and "B". See Fig 1. Resistance should be as specified. See CRANKSHAFT POSITION SENSOR RESISTANCE table. If resistance is not as specified, replace crankshaft position sensor.
CRANKSHAFT POSITION SENSOR RESISTANCE
| Application | Ohms @ 68°F (20°C) | |||
|---|---|---|---|---|
| Miata | (1) | |||
| Millenia | ||||
| 2.3L | 950-1250 | |||
| 2.5L | 520-580 | |||
| Protege | 500-600 | |||
| 626 | 520-580 | |||
|
||||