LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> B2500 SX, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls Trouble Shooting (4 Of 5) >> Charging System Component Tests >> Generator On-Vehicle Tests >> Generator On-Vehicle Tests - Load Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Generator On-Vehicle Tests - Load Test

  1. Switch the Battery Tester to the ammeter function.
  2. Connect the positive and negative leads of the Battery Tester to the corresponding battery terminals.
  3. Connect the current probe to the generator B+ output lead, (O) wire.
  4. With the engine running at 2000 rpm, adjust the Battery Tester load bank to determine the output of the generator; refer to CHARGING SYSTEM SYMPTOM CHART .
scientia non olet · About LEMON Manuals