LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> B2500 SX, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls Trouble Shooting (2 Of 5) >> EVAP System Malfunction
April 5, 2026: LEMON Manuals is launched! Read the announcement.

EVAP System Malfunction

DTC P0451, P0461 DETECTION CONDITION AND POSSIBLE CAUSE

DTC P0451, P0461 EVAP SYSTEM MALFUNCTION
DETECTION CONDITION 
  • P0451 indicates the fuel tank pressure changes greater than 14 in-H2O in 0.10 seconds (sensor circuit noisy).
  • P0461 indicates the fuel level input noisy.
POSSIBLE CAUSE 
  • Intermittent open or short in the FTP sensor circuit (P0451).
  • Intermittent open or short in the FLI circuit (P0461).
HINT  Fuel Tank Pressure Sensor Description 
  • Used to measures the fuel tank pressure during the EVAP monitor test and to control excessive fuel tank pressure by forcing the system to purge.

Fuel Level Input Description 
  • Indicates the fuel level in the tank.
  • Hard wire signal input to the PCM from the fuel pump (FP) module.
DTC P0451, P0461 INSPECTION

STEP INSPECTION ACTION
1 PCM QUICK TEST
  • Was PCM Quick Test performed? 
Yes If any other DTC is present, go to applicable DTC Troubleshooting.
If only DTC P0451 and/or P0461 are present, refer to TEST 4: INTERMITTENT .
No Perform PCM Quick Test.