LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> B2500 SX, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls Trouble Shooting (5 Of 5) >> Charging System Symptom Chart >> Pinpoint Test 9: The Generator Is Noisy
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Pinpoint Test 9: The Generator Is Noisy

PINPOINT TEST 9 - GENERATOR IS NOISY

PINPOINT TEST 9 THE GENERATOR IS NOISY
STEP  INSPECTION  ACTION 
1 CHECK FOR ACCESSORY DRIVE NOISE
  • Check the drive belt for damage and to verify installation.

    See DRIVE BELT SYMPTOM CHART  .

  • Check the accessory mounting brackets for loose bolts or misalignment.
  • Check for a bent generator pulley.
  • Is the accessory drive OK? 
 Yes Go to step 2.
No See DRIVE BELT SYMPTOM CHART  for diagnosis and testing of the accessory drive system.
2 SUBSTITUTE A KNOWN GOOD GENERATOR
  • Key OFF.
  • Install a known good generator.
  • Start the engine.
  • Is the noise present with a known good generator? 
 Yes Install the original generator and check other accessories to find the cause of the noise.
No Replace the generator.
See GENERATOR in GENERATORS & REGULATORS article in Electrical .
Test the system for normal operation.
scientia non olet · About LEMON Manuals