LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P0111: IAT Circuit Problem >> Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC P0111: IAT Circuit Problem: Testing

NOTE: Ensure freeze frame data has been recorded. Check for service bulletins and on-line information.
  1. Disconnect MAF/IAT sensor. Check MAF/IAT sensor connector terminals. If connectors are okay, go to next step. If connectors are faulty, repair as necessary and go to step  4 .
  2. Check resistance between MAF/IAT sensor terminals "A" and "F". If resistance is 550 ohms or more, go to next step. If resistance is less than 550 ohms, replace MAF/IAT sensor and go to step  4 .
  3. Disconnect PCM connector. PCM is mounted to passenger floor, behind glove box. Check PCM terminals No. 39 and No. 91. If terminals are okay, go to next step. If any terminal is faulty, repair as necessary and go to next step.
  4. Reconnect all components. Turn ignition on. Using scan tool, clear DTC. Start engine. Using scan tool, select freeze frame data. Recheck DTCs. If DTC P0111 is pending, replace PCM and go to next step. If DTC P0111 is not pending, go to next step.
  5. Perform after repair procedure. See AFTER REPAIR PROCEDURE  . If no DTC is present, testing is complete. If any DTC is present, go to appropriate test for diagnosis and repair.
scientia non olet · About LEMON Manuals