Removal & Installation

WARNING: This page is about a different car, the 2002 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the battery negative cable.
Remove the air cleaner.
Remove the air cleaner outlet pipe.
Disconnect the electrical connectors.

Fig 1: Disconnecting Electrical Connectors
Courtesy of MAZDA MOTORS CORP.
Remove the bolts.

Fig 2: Removing Anti-Lock Brake Control Module Bolts
Courtesy of MAZDA MOTORS CORP.
Remove the bolt.

Fig 3: Removing Bolt
Courtesy of MAZDA MOTORS CORP.
Raise and support the vehicle.
Remove the screws and the control module.
NOTE: The 4x2 and 4x4 modules are not interchangeable. Before installing a module, verify its application.

Fig 4: Removing Anti-Lock Brake Control Module
Courtesy of MAZDA MOTORS CORP.
To install, reverse the removal procedure.