LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Engine Control System) >> Pcm Removal/Installation >> PCM Panel Removal Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

PCM Panel Removal Note

WARNING: This page is about a different car, the 2005 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before removing the PCM panel, pull the PCM connector harness stay fastener out from the PCM panel.
  2. Remove the upper right side of the PCM panel installation nut located at the back of the blower unit as shown.
  3. Remove the lower side of the PCM panel installation nuts located at the bottom of the cabin carpet.
    Fig 1: Removing PCM Panel
    G03700024Courtesy of MAZDA MOTORS CORP.
  4. Remove four installation nuts, then pull the PCM panel down to remove from installation place.
    Fig 2: Removing PCM Panel
    G03700025Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals