Knock Sensor (KS) Removal/Installation
WARNING: This page is about a different car, the 2005 Mazda RX-8 and 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the KS connector.
- Remove the KS installation bolt and remove the KS.
- Install in the reverse order of removal.
KS tightening torque
- 15-25 N.m {1.6-2.5 kgf.m, 12-18 ft.lbf}
Courtesy of MAZDA MOTORS CORP.