LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV DX >> Repair and Diagnosis >> External Pages >> Different car >> Section 488 (Dynamic Stability Control System) >> DSC HU/Cm Removal/Installation >> Connector Installation Note
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Connector Installation Note

WARNING: This page is about a different car, the 2005 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. After connecting the connector, rotate the lock lever in the direction of the arrow to install the DSC HU/CM connector.
    Fig 1: Rotating Lock Lever
    G03702460Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals