LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2000 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Self-Diagnostics - Introduction >> Additional System Functions >> Drive Cycles - MIATA & MILLENIA >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Drive Cycles - MIATA & MILLENIA: Notes

  1. Connect scan tool. Start engine. Select GENERIC OBD-II FUNCTIONS. Select ON BOARD SYSTEM READINESS mode. Check OBD-II system check condition. If scan tool displays ALL TESTS ARE COMPLETE, drive cycle procedure does not need to be performed. If scan tool does not display ALL TESTS ARE COMPLETE, go to next step.
  2. Select PID/DATA MONITOR. Select RFCFLAG and press START. If RFCFLAG status is YES, go to next step. If status is NO, perform DRIVE CYCLE-MODE 1  .
  3. Select ON BOARD SYSTEM READINESS mode. If EVAPORATIVE PURGE SYSTEM check status is YES, go to next step. If check status is NO, perform DRIVE CYCLE-MODE 4  .
  4. Select ON BOARD SYSTEM READINESS mode. If EGR SYSTEM check status is YES, go to next step. If check status is NO, perform DRIVE CYCLE-MODE 2  .
  5. Select ON BOARD SYSTEM READINESS mode. If OXYGEN SENSOR HEATER check status is YES, go to next step. If check status is NO, perform DRIVE CYCLE-MODE 3  .
  6. Select ON BOARD SYSTEM READINESS mode. If OXYGEN SENSOR check status is YES, go to next step. If check status is NO, perform DRIVE CYCLE-MODE 3  .
  7. Select ON BOARD SYSTEM READINESS mode. If CATALYST check status is YES, no further procedure is required. If check status is NO, perform DRIVE CYCLE-MODE 3  .
scientia non olet · About LEMON Manuals