Secondary Shutter Valve (SSV) Switch Removal/Installation
WARNING: This page is about a different car, the 2005 Mazda RX-8 and 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the SSV switch connector.
- Remove the SSV installation screws and remove the SSV switch.
- Install in the reverse order of removal.
SSV switch tightening torque
- 1.3-1.9 N.m {14-19 kgf.cm, 12-16 in.lbf}
Courtesy of MAZDA MOTORS CORP.