Section 53 (Air Bag System)
WARNING: This page is about a different car, the 2002 Mazda 626. However, it is still accessible from the selected car via links, so may be relevant.
- Description & Operation
- Component Locations
- System Operation Check
- Air Bag Safety Precautions
- Adjustments
- Disabling & Activating Air Bag System
- Disposal Procedures
- Post-Collision Inspection
- Removal & Installation
- Diagnostics
- Diagnostic Tests
- Air Bag Warning Light Does Not Come On When Ignition Is Turned On
- Air Bag Warning Light Remains On After Ignition Is Turned On
- DTC 1: SAS Control Unit Poor Connection
- DTC 2: SAS Control Unit
- DTC 3: Battery Power
- DTC 5: Side Air Bag Wiring Harness
- DTC 6: Driver-Side Air Bag Module
- DTC 7: Passenger-Side Air Bag Module
- DTC 11 & 12: SAS Connector Terminal "U" Grounded
- DTC 21: Poor Connection At Left Side Air Bag Sensor Connector
- DTC 22: Left Side Air Bag Sensor Malfunction
- DTC 23: Left Side Air Bag Sensor Voltage Drop
- DTC 25: SAS Control Unit-To-Left Side Air Bag Sensor Malfunction
- DTC 26: Left Side Air Bag Module
- DTC 31: Poor Connection At Right Side Air Bag Sensor Connector
- DTC 32: Right Side Air Bag Sensor Malfunction
- DTC 33: Right Side Air Bag Sensor Voltage Drop
- DTC 35: SAS Control Unit-To-Right Side Air Bag Sensor Malfunction
- DTC 37: Right Side Air Bag Module
- Wire Repair
- Torque Specifications
- Wiring Diagrams