PCM Inspection Using the SST (WDS or equivalent): Notes
WARNING: This page is about a different car, the 2004 Mazda MPV. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
- PIDs for the following parts are not available on this model. Go to the appropriate part inspection page.
- CMP sensor (See CAMSHAFT POSITION (CMP) SENSOR INSPECTION .)
- Main relay (See RELAY INSPECTION .)
- Connect the WDS or equivalent to the DLC-2. (See ON-BOARD DIAGNOSTIC TEST .)
- Turn the ignition switch to ON.
- Measure the value.
- If the value is not within the specification, follow the instructions in Action column.