Hazard Warning Switch Inspection

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
Remove the lower panel. (See LOWER PANEL REMOVAL/INSTALLATION .)
Remove the center panel module. (See CENTER PANEL MODULE REMOVAL/INSTALLATION .)
Verify continuity between the hazard switch terminals.

Fig 1: Inspecting Hazard Warning Switch Continuity
Courtesy of MAZDA MOTORS CORP.

Fig 2: Identifying Inspecting Hazard Warning Switch Terminals
Courtesy of MAZDA MOTORS CORP.

If not as indicated, replace the center panel.