Back-Up Light Switch Inspection

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the back-up light switch connector.
Verify that the continuity between the back-up light switch terminals is as indicated. See Fig 1.
- If not as indicated, replace the back-up light switch.
Fig 1: Back-Up Light Switch Terminal Continuity
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting Back-Up Light Switch
Courtesy of MAZDA MOTORS CORP.