DTC P0107: BARO Sensor Input Low: Condition

PCM monitors input voltage during monitoring conditions. If voltage at terminal No. 34 is less than .2 volt, DTC is set. Causes may include the following:

• Faulty EGR boost sensor.
• Short to ground in Violet/Red wire between EGR boost sensor harness connector terminal "B" and PCM harness connector terminal No. 34.
• Open in Pink/Blue wire between EGR boost sensor harness connector terminal "C" and PCM harness connector terminal No. 90
• Faulty connection at EGR boost sensor connector or PCM connector.
• PCM malfunction.