LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Variable Valve Timing System >> Variable Valve Timing Actuator >> Extreme Spark Retard Position
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Extreme Spark Retard Position

  1. Disconnect negative battery cable.
  2. Remove Variable Valve Timing (VVT) actuator.
    CAUTION: If engine oil gets on parts, they may not function properly. When removing VVT actuator, be sure to cover other parts with a cloth to protect them from oil.
  3. Ensure camshaft dowel pin hole on VVT actuator is aligned with top of third tooth, by counting back 3 teeth to sprocket gap which is aligned with alignment mark. See Fig 1 . If not as specified, stopper pin in VVT actuator is not engaged at position of maximum valve timing retard. Replace VVT actuator.
    Fig 1: Checking Alignment Of Camshaft Dowel Pin
    G00143774Courtesy of MAZDA MOTORS CORP.
  4. Install VVT actuator.
scientia non olet · About LEMON Manuals