LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2001 >> MPV LX >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - System & Component Testing >> Fuel System >> Fuel Control >> Fuel Cut Control System - Miata
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Cut Control System - Miata

  1. To check system operation, connect New Generation Star (49 T088 0A0) scan tool to DLC-2. DLC-2 is located under left side of instrument panel, behind fuse block cover. Ensure engine is at normal operating temperature. Allow engine to idle. Turn A/C switch off.
  2. Using scan tool, access DIAGNOSTIC DATA LINK menu, and select PCM. Highlight and select PID/DATA MONITOR AND RECORD. Select RPM and INJ. Scan tool will measure and display fuel injector pulse width. Increase engine speed to 2500 RPM, then quickly close throttle valve.
  3. Fuel injection pulse width should be zero milliseconds until engine speeds drops below 1000 RPM, then pulse width should be 2-5 milliseconds. If pulse width is as specified, Fuel cutoff system is functioning properly.
scientia non olet · About LEMON Manuals