Using SST (WDS Or Equivalent)
- After repairs have been made, perform the DTCs retrieving procedure . See DTCS RETRIEVING PROCEDURE .
- Erase DTC by WDS or equivalent.
- Ensure that the customer's concern has been resolved.NOTE: After repairing the ABS wheel-speed sensor or replacing ABS HU/CM, the ABS and/or BRAKE system warning light may not go off when ignition key is turned ON. In this case, start engine and drive the vehicle at a speed of more than 10 km/h {6.2 MPH} until the ABS and/or BRAKE system warning light goes off.