LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> B2300 Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Module Communications Network) >> Self-Diagnostic System >> Module Version Identification
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Module Version Identification

WARNING: This page is about a different car, the 2001 Mazda B4000, 2001 Mazda B3000, 2001 Mazda B2500, and 2001 Mazda B2300. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If instructed to retrieve PID from a specified test procedure, ensure ignition is in proper position as listed in test procedure or the test will fail. This procedure may be used to verify correct version of module being tested.
  1. Connect New Generation Star (NGS) tester to Data Link Connector (DLC) and perform proper hookup procedure. Refer to EQUIPMENT HOOKUP .
  2. Turn ignition switch to ON position, unless otherwise instructed by specified test procedure. Rotate dial on NGS tester to select DIAGNOSTIC DATA LINK menu and press trigger.
  3. Rotate dial on NGS tester to highlight the desired module you wish to access and press trigger. Rotate dial on NGS tester to highlight menu MODULE IDENTIFICATION and press trigger. Module version information will be displayed.
scientia non olet · About LEMON Manuals