LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mazda >> 2002 >> MPV ES >> Repair and Diagnosis (Single Page) >> Transmission >> Automatic Trans >> Automatic Transaxle - Overhaul [Ja5EL] >> Automatic Transaxle Assembly >> Precaution >> General Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

General Notes

  1. Select the adjustment shims, referring to BEARING PRELOAD  and REDUCTION GEAR BEARING PRELOAD  .
  2. If the drive plates or 2-4 brake band are replaced with new ones, soak the new part in ATF for at least two hours before installation.
  3. Before assembly, apply ATF to all seal rings, rotating parts, O-rings, and sliding parts.
  4. All O-rings, seals, and gaskets must be replaced with the new ones included in the overhaul kit.
  5. Use petroleum jelly, not grease, when assembling again.
  6. When it is necessary to replace a bushing, replace the subcomponent that includes the bushing.
  7. Assemble the housing within 10 minutes after applying sealant, and allow it to cure for at least 30 minutes after assembly before filling the transaxle with ATF.
scientia non olet · About LEMON Manuals